The influence of process parameters on the surface roughness in aesthetic machining of wooden edge-glued panels (EGPs)

SÜTÇÜ A., Karagöz Ü.

BioResources, cilt.8, sa.4, ss.5435-5448, 2013 (SCI-Expanded, Scopus) identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 8 Sayı: 4
  • Basım Tarihi: 2013
  • Doi Numarası: 10.15376/biores.8.4.5435-5448
  • Dergi Adı: BioResources
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.5435-5448
  • Anahtar Kelimeler: Aesthetic machining, Beech, Chestnut, End-milling, Surface roughness, Walnut, Wood edge-glued-panel (EGP)
  • Isparta Uygulamalı Bilimler Üniversitesi Adresli: Evet

Özet

This study explored the effect of processing parameters on surface roughness as a result of aesthetic designs processed on walnut, chestnut, and beech wood edge-glued panels (EGPs) by CNC (computer numerical control) router. To accomplish this, the average roughness value (Ra) on an engraved surface in a Ying-Yang design treated on the material was measured. Using analysis of variance (ANOVA), the feed rate, spindle speed, step-over, and axial depth of cut factors; surface roughness factors; and the interactions between these factors were found to form significant differences at the level of 95%. At the end of the study, the Ra value was lower in walnut and beech EGPs (3.423 μm and 4.316 μm, respectively) and higher in chestnut EGPs (5.005 μm).