Machine Learning-Driven Prediction of Manufacturing Parameters and Analysis of Mechanical Properties of PC-ABS Specimens Produced by the Fused Deposition Modeling Additive Manufacturing Method
Polymers, cilt.18, sa.7, 2026 (SCI-Expanded, Scopus)
- Yayın Türü: Makale / Tam Makale
- Cilt numarası: 18 Sayı: 7
- Basım Tarihi: 2026
- Doi Numarası: 10.3390/polym18070886
- Dergi Adı: Polymers
- Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Chemical Abstracts Core, Compendex, INSPEC
- Anahtar Kelimeler: additive manufacturing, ANOVA, flexural strength, fused deposition modeling, impact energy, machine learning, PC-ABS, tensile strength
- Isparta Uygulamalı Bilimler Üniversitesi Adresli: Evet
Özet
This study aims to investigate the effect of manufacturing parameters on the mechanical properties of PC-ABS samples produced by the Fused Deposition Modeling (FDM) additive manufacturing method and to model these relationships using machine learning methods. In the study, the parameters of printing speed, infill density, and raster angle were determined according to the Taguchi L16 experimental design, and tensile, bending, and impact tests were performed on the produced samples. Experimental results showed that the infill density parameter resulted in an increase in tensile strength of approximately 62% (from 25.10 MPa to 40.71 MPa) and an increase in flexural strength of approximately 46% (from 45.13 MPa to 66.13 MPa). Furthermore, an improvement in impact energy of approximately 45% (from 1.698 J to 2.467 J) was achieved under optimum printing speed conditions. Mechanistic properties were predicted using Decision Tree, Random Forest, K-Nearest Neighbors, and Multilayer Perceptron models with a dataset generated from experimental data. Comparing the model performances, the Random Forest algorithm was found to provide the highest prediction performance with accuracy in the R2 range of 0.94–0.99 and RMSE values below 0.5, demonstrating strong generalization capabilities. The results showed that infill density is the most decisive parameter on both tensile and flexural strength, and that printing speed has a significant effect, especially on impact energy. ANOVA analyses revealed that all main parameters have statistically significant effects on mechanical properties. In the performance comparison of the machine learning models, the Random Forest algorithm provided the highest prediction accuracy, demonstrating that mechanical properties can be reliably predicted. In conclusion, it has been shown that the mechanical performance of PC-ABS parts produced by the FDM method can be optimized by using the correct selection of production parameters and machine learning-based modeling approaches.