A New Way to Improve the Drying Kinetics and Final Quality of Peppermint


ÖZGÜVEN M. M., Tarhan S., Polatci H., TELCİ İ.

Journal of Essential Oil-Bearing Plants, vol.19, no.6, pp.1368-1379, 2016 (SCI-Expanded, Scopus)

  • Publication Type: Article / Article
  • Volume: 19 Issue: 6
  • Publication Date: 2016
  • Doi Number: 10.1080/0972060x.2016.1205522
  • Journal Name: Journal of Essential Oil-Bearing Plants
  • Journal Indexes: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Page Numbers: pp.1368-1379
  • Keywords: Color analysis, Drying kinetics, Drying technology, Essential oil, Peppermint
  • Isparta University of Applied Sciences Affiliated: No

Abstract

Drying is the most common postharvest process to preserve medicinal and aromatic plants. Peppermint has a high worldwide commercial value. Newly harvested peppermint plants were dried by using four different drying air temperature profiles. They were constant 35°C, constant 55°C, incremental rises from 35°C to 55°C in four hours, and in eight hours. The samples were dried down to the final moisture content for 8 to 18.5 hours. The fastest drying was obtained with the use of the constant 55°C and the slowest drying was obtained with the use of the constant 35°C. The incremental rise of drying air temperature profile from 35°C to 55°C within 4 hours shortened the drying time by 46%. Page’s equation excellently represented all drying curves. Maximum color change and essential oil loss occurred with the drying at 55°C; however, incremental rise of drying air temperature over time reduced the extent of color change and essential oil loss. The highest essential oil change was -21.95% for the constant 55°C, the lowest essential oil change was -2.32% for the constant 35°C. The temperature of heated air affected the composition of peppermint essential oil. Drying at constant 55°C kept menthol content (43.31%) close to that (47.64%) of fresh peppermint but decreased menthone content (26.24%) and increased cineol content (8.18%). Considering the length of drying time and dried product quality values, the profile in which the drying air temperature rise within 4 hours was found to give the best results.