The production route of the MASnBr3 based perovskite solar cells with fully ultrasonic spray pyrolysis method
Physica B: Condensed Matter, cilt.645, 2022 (SCI-Expanded, Scopus)
- Yayın Türü: Makale / Tam Makale
- Cilt numarası: 645
- Basım Tarihi: 2022
- Doi Numarası: 10.1016/j.physb.2022.414293
- Dergi Adı: Physica B: Condensed Matter
- Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Academic Search Premier, PASCAL, Aerospace Database, Chemical Abstracts Core, Communication Abstracts, INSPEC, Metadex, Civil Engineering Abstracts
- Anahtar Kelimeler: Lead-free, Perovskite solar cells, Spray coating, Ultrasonic spray pyrolysis
- Isparta Uygulamalı Bilimler Üniversitesi Adresli: Hayır
Özet
Lead-free FTO/TiO2/MASnBr3/P3HT/Ag perovskite solar cells (PSCs) were fabricated by a fully ultrasonic spray pyrolysis (USP) method. The MASnBr3 thin films had very large grains (clusters) up to 15 μm. The crystal/crystallite size of the films was determined from the XRD pattern as 112.7 nm. The coating of MASnBr3 and P3HT layers was carried out on a large area of 36 cm2. The champion cell with an active area of 0.30 cm2 has an open circuit voltage of 0.370 V, a short circuit of 0.460 mA/cm2, a fill factor of 57.2%, and a power conversion efficiency of 0.097%. The production of all layers with the USP method is important to the commercialization of the lead-free PSCs.