Yayınlar & Eserler

Yayın Ağı
Makaleler 40
Tümü (40)
SCI-E, SSCI, AHCI (16)
SCI-E, SSCI, AHCI, ESCI (18)
ESCI (2)
Scopus (18)
TRDizin (10)
Diğer Yayınlar (13)

1. Effect of heat treatments on the strength and stiffness of poplar

YILMAZ AYDIN T., AYDIN M., ÖZKAN U.
Maderas: Ciencia y Tecnologia , cilt.27, 2025 (SCI-Expanded, Scopus) identifier

2. Influence of Hardener Type on the Particleboard Properties at Industrial Scale

Çamlıbel O., AYDIN M., Koç E.
Proceedings of the National Academy of Sciences India Section A - Physical Sciences , cilt.95, sa.1, ss.33-40, 2025 (SCI-Expanded, Scopus) identifier

3. Influence of Décor and Overlay Paper Mass on Laminate Floor Product Properties

AYDIN M., Kara M. E., Çamlıbel O.
Lesnoy Zhurnal , cilt.2025, sa.2, ss.172-182, 2025 (ESCI, Scopus) identifier

4. Influences of UF Adhesive Consumption on HDF Properties

AYDIN M., Çamlıbel O.
Drewno , cilt.68, sa.216, 2025 (SCI-Expanded, Scopus) identifier

5. Mechanical and Finite Element Analysis of a Tree Microstructural Model Derived from Softwood Annual Rings

GÖRGÜLÜ Y. F., AYDIN M.
BioResources , cilt.20, sa.3, ss.7842-7855, 2025 (SCI-Expanded, Scopus) identifier

6. Auxeticity and Wood Auksetičnost i drvo

AYDIN M., Yılmaz Aydın T.
Drvna Industrija , cilt.76, sa.1, ss.21-32, 2025 (SCI-Expanded, Scopus) identifier

7. INFLUENCE OF PARAFFIN ON MDF PROPERTIES AT INDUSTRIAL SCALE

Çamlibel O., AYDIN M.
Wood Research , cilt.70, sa.1, ss.127-138, 2025 (SCI-Expanded, Scopus) identifier

8. INFLUENCES OF OAK UTILIZATION ON THE MEDIUM DENSITY FIBERBOARD PROPERTIES

Çamlıbel O., AYDIN M., Koç E.
Maderas: Ciencia y Tecnologia , cilt.26, 2024 (SCI-Expanded, Scopus) identifier

9. Influence of some production parameters on laminate floor product properties

Kara M. E., AYDIN M., ÇAMLIBEL O.
ProLigno , cilt.20, sa.2, ss.51-58, 2024 (Hakemli Dergi)

10. Non-Destructive Evaluation of Thermal Treatment Influence on Elastic Engineering Parameters of Poplar Ocjena utjecaja toplinske obrade na elastična svojstva drva topole nedestruktivnom metodom

YILMAZ AYDIN T., AYDIN M.
Drvna Industrija , cilt.75, sa.4, ss.405-418, 2024 (SCI-Expanded, Scopus) identifier

11. Structural Investigation of Wood-Inspired Cell Wall Geometries Using Additive Manufacturing: Compression Testing and Finite Element Analysis Validation

AYDIN M., GÖRGÜLÜ Y. F.
BioResources , cilt.19, sa.4, ss.7493-7512, 2024 (SCI-Expanded, Scopus) Creative Commons License identifier

12. Influence of Growth Ring Number and Width on Elastic Constants of Poplar

AYDIN M., YILMAZ AYDIN T.
BioResources , cilt.18, sa.4, ss.8484-8502, 2023 (SCI-Expanded, Scopus) Creative Commons License identifier

13. Perception of Yachts by Non-Owners

AYDIN M.
Bilge International Journal of Science and Technology Research , cilt.7, sa.2, ss.162-171, 2023 (Hakemli Dergi)

14. Estimating the Strength and Deformation Properties of the End Milling Process Using Numerical Analysis Methods

GÖRGÜLÜ Y. F., AYDIN M.
Sakarya University Journal of Science , cilt.27, sa.3, ss.580-589, 2023 (Scopus, TRDizin) Creative Commons License identifier identifier

15. Influence of Density on Medium-Density Fiberboard Properties at Industrial Scale Experimental

ÇAMLIBEL O., AYDIN M.
ProLigno , cilt.19, sa.2, ss.11-20, 2023 (Hakemli Dergi)

16. Computational Fluid Dynamics and Thermal Analysis of an Unloaded Lumber-drying Kiln

GÖRGÜLÜ Y. F., AYDIN M.
KASTAMONU UNIVERSITY JOURNAL OF FORESTRY FACULTY , cilt.23, sa.1, ss.64-74, 2023 (ESCI, TRDizin) Creative Commons License

17. Demir Ağacı (Casuarina equisetifolia L.) Odunundan Üretilen Orta Yoğunlukta Lif Levhaların (MDF) Fiziksel ve Mekanik Özelliklerinin Araştırılması

ÇAMLIBEL O., AYDIN M.
TURKISH JOURNAL OF AGRICULTURAL AND NATURAL SCIENCE , cilt.9, sa.4, ss.892-899, 2022 (TRDizin)

18. Influences of hardening agent on some physical and mechanical properties of medium-density fiberboard

ÇAMLIBEL O., AYDIN M.
TURKISH JOURNAL OF FORESTRY , cilt.23, sa.2, ss.128-134, 2022 (TRDizin) identifier

19. COMPARATIVE STUDY OF DESTRUCTIVE, NONDESTRUCTIVE, AND NUMERICAL METHODS ON THE DETERMINATION OF MOISTURE-DEPENDENT SHEAR MODULI OF CALABRIAN PINE

AYDIN M., Ciritcioğlu H. H.
Materials Evaluation , cilt.80, sa.5, ss.32-41, 2022 (SCI-Expanded, Scopus) identifier

20. Bio-Mimicry: Tree Rings and Three-Dimensional Printing – Preliminary Biomimetic Experiments with Fused Deposition Modeling Using Acrylonitrile Butadiene Styrene Filament

AYDIN M., YILMAZ AYDIN T.
BioResources , cilt.17, sa.4, ss.6588-6597, 2022 (SCI-Expanded, Scopus) identifier

21. Effects of Annual Ring Number and Width on Ultrasonic Waves in Some Softwood Species

AYDIN M.
BioResources , cilt.17, sa.1, ss.1745-1763, 2022 (SCI-Expanded, Scopus) identifier

22. The Effects of Continuous Press Speed and Conditioning Time on the Particleboard Properties at Industrial Scale

Çamlıbel O., AYDIN M.
BioResources , cilt.17, sa.1, ss.159-176, 2022 (SCI-Expanded, Scopus) identifier

23. Comparative study of destructive, nondestructive, and numerical procedures for the determination of moisture dependent shear moduli in Scots pine wood

AYDIN M., Ciritcioǧlu H. H.
Materialpruefung/Materials Testing , cilt.63, sa.11, ss.1063-1069, 2021 (SCI-Expanded, Scopus) identifier

24. Influence of Temperature and Exposure Duration on the Bending Properties of Oak Wood

YILMAZ AYDIN T., AYDIN M.
Bartın Orman Fakültesi Dergisi , cilt.22, sa.3, ss.871-877, 2020 (TRDizin) identifier

25. Moisture dependent elastic properties of naturally aged black pine wood

AYDIN M., YILMAZ AYDIN T.
Construction and Building Materials , cilt.262, 2020 (SCI-Expanded, Scopus) identifier

26. Is Turkey really a global competitor in yacht building industry?

AYDIN M., YILMAZ AYDIN T.
The Online Journal of Science and Technology , cilt.9, sa.2, ss.200-208, 2019 (Hakemli Dergi)

27. Effect of density and propagation length on ultrasonic longitudinal wave velocity in some important wood species grown in Turkey

YILMAZ AYDIN T., AYDIN M.
TURKISH JOURNAL OF FORESTRY , cilt.19, sa.4, ss.413-418, 2018 (TRDizin) Creative Commons License identifier

28. Comparison of temperature dependent Young’s modulus of oriental beech (Fagus orientalis L.) that determined by ultrasonic wave propagation and compression test

YILMAZ AYDIN T., AYDIN M.
TURKISH JOURNAL OF FORESTRY , cilt.19, sa.2, ss.185-191, 2018 (TRDizin) identifier

29. Shear Moduli Prediction of Calabria Pine (Pinus brutia Ten.) using Ultrasonic Wave Propagation

AYDIN M., CİRİTCİOĞLU H. H.
Düzce Üniversitesi Bilim ve Teknoloji Dergisi , cilt.6, sa.1, ss.176-187, 2018 (TRDizin) identifier

30. Antimicrobial Properties of Wood Water Obtained by a High-Frequency Vacuum Drying Method

BUDAKÇI M., AYDIN M., AŞKUN T., Güner P.
The Online Journal of Science and Technology , cilt.8, sa.3, ss.21-25, 2018 (Hakemli Dergi)

31. Finite element analysis of chair frames using CATIA

AYDIN M., YILMAZ AYDIN T.
Düzce Üniversitesi İleri Teknoloji Bilimleri Dergisi , cilt.6, sa.3, ss.621-631, 2017 (Hakemli Dergi)

32. Üniversite sanayi işbirliği üzerine bir araştırma: Kütahya ili Ağaç İşleri-Mobilya Endüstrisi örneği

CİRİTCİOĞLU H. H., ŞENOL S., AYDIN M.
Düzce Üniversitesi İleri Teknoloji Bilimleri Dergisi , cilt.6, sa.3, ss.1174-1187, 2017 (Hakemli Dergi)

33. Three dimensional finite element analysis of compression behavior of oriental beech

YILMAZ AYDIN T., AYDIN M.
Düzce Üniversitesi İleri Teknoloji Bilimleri Dergisi , cilt.6, sa.3, ss.795-803, 2017 (Hakemli Dergi)

34. YÜKSEKÖĞRETİMDE MESLEKİ EĞİTİMİN ÖNEMİ VE BİR ALAN ARAŞTIRMASI - IMPORTANCE OF VOCATIONAL EDUCATION IN HIGHER EDUCATION AND A FIELD STUDY

AYDIN M., MERDAN R., AKYÜREKLİ Ö.
MEHMET AKIF ERSOY UNIVERSITY JOURNAL OF SOCIAL SCIENCES INSTITUTE , 2017 (TRDizin) Creative Commons License

35. Noise and Vibration Damping for Yacht Interior

AYDIN M., YILMAZ AYDIN T., GÜNTEKİN E.
Mugla Journal of Science and Technology , cilt.2, sa.2, ss.166-170, 2016 (Hakemli Dergi)

36. A Case Study of University Industry Cooperation

CİRİTCİOĞLU H. H., AYDIN M., ŞENOL S.
Mugla Journal of Science and Technology , cilt.2, sa.2, ss.89-95, 2016 (Hakemli Dergi) Creative Commons License

37. Türkiye de İnşa Edilen Yatların İç Mekan Tasarımı Üzerine Bir Araştırma

AYDIN M., YILMAZ AYDIN T.
Tasarım+Kuram , cilt.11, sa.21, ss.61-77, 2016 (TRDizin)

38. Yat Mobilyası İmalatı ve İşletmelerin Karşılaştıkları Sorunlar Üzerine Alan Araştırması

AYDIN M., KOÇ K. H.
Selçuk Teknik Online , ss.251-268, 2015 (Hakemli Dergi)

39. Türkiye de Yat İç Mekan Tasarımının Malzeme Seçimine Etkileri

AYDIN M.
Selçuk Teknik Online , ss.350-368, 2015 (Hakemli Dergi)

40. Additive Manufacturing Is It a New Era for Furniture Production

AYDIN M.
Journal of Mechanics Engineering and Automation , cilt.5, ss.338-347, 2015 (Hakemli Dergi)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 33

1. Vibrational Testing Methods for Dynamic Elastic Modulus of Pine Wood

YILMAZ AYDIN T., AYDIN M., Roohnia M.
The International Science, Health and Art Congress, Burdur, Türkiye, 29 Mayıs 2025, (Özet Bildiri)

2. Influence of ring dislocations or irregularities on the compression behavior of the wood-based structure

AYDIN M.
2nd International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 15 - 18 Ekim 2022, ss.321, (Özet Bildiri)

3. Relationship Between Density or Propagation Length and Ultrasonic Wave Velocity in Sessile Oak (Quercus Petraea) Wood

YILMAZ AYDIN T., AYDIN M.
4th International Conference on Advances in Mechanical Engineering, İstanbul, Türkiye, 19 - 21 Aralık 2018, ss.1708-1712, (Tam Metin Bildiri)

4. Furniture and Decoration Education in Higher Education

AYDIN M., YILMAZ AYDIN T.
4th International Conference on Advances in Mechanical Engineering, İstanbul, Türkiye, 19 - 21 Aralık 2018, ss.1713-1717, (Tam Metin Bildiri)

5. Üç Boyutlu Baskı ile Üretilmiş Ürünlerin Mekanik Testleri ve Kullanılan Standartlar

AYDIN M., YILMAZ AYDIN T.
5th International Symposium on Multidisciplinary Studies, Ankara, Türkiye, 16 Kasım 2018, ss.505, (Özet Bildiri)

6. Prediction of bending properties of oriental beech wood exposed to temperature

YILMAZ AYDIN T., AYDIN M.
International Forest Products Congress, Trabzon, Türkiye, 26 - 29 Eylül 2018, ss.788-794, (Tam Metin Bildiri)

7. Shear moduli determination of naturally aged black pine wood

AYDIN M., YILMAZ AYDIN T.
International Forest Products Congress, Trabzon, Türkiye, 26 - 29 Eylül 2018, ss.791-795, (Tam Metin Bildiri)

8. Relationship between density or propagation length and ultrasonic wave velocity in cedar (cedrus libani) wood

YILMAZ AYDIN T., AYDIN M.
International Science and Technology Conference, Paris, Fransa, 18 - 20 Temmuz 2018, ss.531-535, (Tam Metin Bildiri)

9. Is Turkey really a global competitor in yacht building industry

AYDIN M., YILMAZ AYDIN T.
International Science and Technology Conference, Paris, Fransa, 18 - 20 Temmuz 2018, ss.378-386, (Tam Metin Bildiri)

10. Three Dimensional Finite Element Analysis of Compression Behavior of Oriental Beech

YILMAZ AYDIN T., AYDIN M.
4th International Furniture and Decoration Congress, Düzce, Türkiye, 19 - 21 Ekim 2017, ss.190-197, (Tam Metin Bildiri)

11. Finite Element Analysis of Chair Frames Using CATIA

AYDIN M., YILMAZ AYDIN T.
4th International Furniture and Decoration Congress, Düzce, Türkiye, 19 - 21 Ekim 2017, ss.22-32, (Tam Metin Bildiri)

12. Finite Element Analysis of Chair Frame Using CATIA

AYDIN M., YILMAZ AYDIN T.
4th Int. Furniture and Decoration Congress, Düzce, Türkiye, 19 - 21 Kasım 2017, ss.22-32, (Tam Metin Bildiri)

13. Üniversite sanayi işbirliği üzerine bir araştırma: Kütahya ili ağaç işleri-mobilya endüstrisi örneği

CİRİTCİOĞLU H. H., ŞENOL S., AYDIN M.
4th International Furniture and Decoration Congress, Düzce, Türkiye, 19 - 21 Ekim 2017, ss.423-436, (Tam Metin Bildiri)

14. Antimicrobial Properties of Wood Water Obtained by a High Frequency Vacuum Drying Method

BUDAKÇI M., AYDIN M., AŞKUN T., güner p.
International Science and Technology Conference, Berlin, Almanya, 17 - 19 Temmuz 2017, ss.104-108, (Tam Metin Bildiri)

15. Shear Modulus Determination of Black Pine Wood Using Ultrasound

AYDIN M., CİRİTCİOĞLU H. H., YILMAZ AYDIN T.
20th International Nondestructive Testing and Evaluation of Wood Symposium, Madison, Amerika Birleşik Devletleri, 12 - 15 Eylül 2017, ss.237-243, (Tam Metin Bildiri)

16. Young Modulus Determination of Turkish Red Pine Wood by Destructive and Nondestructive Test Methods

YILMAZ AYDIN T., AYDIN M.
20th International Nondestructive Testing and Evaluation of Wood Symposium, Madison, Amerika Birleşik Devletleri, 12 - 15 Eylül 2017, ss.229-236, (Tam Metin Bildiri)

17. Determination of Compression Properties in Radial Direction of Oriental Beech Exposed to Temperature Using Ultrasound and Static Tests

YILMAZ AYDIN T., AYDIN M.
20th International Nondestructive Testing and Evaluation of Wood Symposium, Madison, Amerika Birleşik Devletleri, 12 - 15 Eylül 2017, ss.249-254, (Tam Metin Bildiri)

18. Yükseköğretimde Mesleki Eğitimin Önemi ve Bir Alan Araştırması

AYDIN M., MERDAN R., AKYÜREKLİ Ö.
4. Ulusal Meslek Yüksekokulları Sosyal ve Teknik Bilimler Kongresi, Burdur, Türkiye, 11 - 13 Mayıs 2017, (Tam Metin Bildiri)

19. Use of CATIA for Analysis of Structures Constructed with Sustainable Biomaterial

AYDIN M., YILMAZ AYDIN T.
International Conference on Agriculture, Forest, Food Sciences and Technologies (ICAFOF), Nevşehir, Türkiye, 15 Mayıs 2017, (Özet Bildiri)

20. Effect of Temperature on Compression Properties of Oriental Beech (Fagusorientalis L.) Wood in Radial and Tangential Directions

YILMAZ AYDIN T., AYDIN M.
International Conference on Agriculture, Forest, Food Sciences and Technologies (ICAFOF), Nevşehir, Türkiye, 15 - 17 Mayıs 2017, ss.627, (Özet Bildiri)

21. Elastic Constants of Calabrian Pine and Cedar

GÜNTEKİN E., YILMAZ AYDIN T., AYDIN M.
International Forestry Symposium, Kastamonu, Türkiye, 7 - 10 Aralık 2016, ss.645-649, (Tam Metin Bildiri)

22. Finite Element (FE) Analysis of Chair Frames Constructed with Turkish Red Pine (Pinus brutia Ten.)

YILMAZ AYDIN T., GÜNTEKİN E., AYDIN M.
1st International Mediterranean Science and Engineering Congress (IMSEC 2016), Adana, Türkiye, 26 Ekim 2016, ss.1919-1925, (Tam Metin Bildiri)

23. Effects of Heat Treatment on Some Orthotropic Mechanic Properties of Oak Quercus petraea Wood

YILMAZ AYDIN T., GÜNTEKİN E., AYDIN M.
1st International Mediterranean Science and Engineering Congress, Adana, Türkiye, 26 - 28 Ekim 2016, ss.2996-3003, (Tam Metin Bildiri)

24. Finite Element Analysis of Chair Frames Constructed with Turkish Red Pine

YILMAZ AYDIN T., GÜNTEKİN E., AYDIN M.
1st International Mediterranean Science and Engineering Congress, Adana, Türkiye, 26 - 28 Ekim 2016, ss.2043-2049, (Tam Metin Bildiri)

25. Noise and Vibration Damping for Yacht Interior

AYDIN M., YILMAZ AYDIN T., GÜNTEKİN E.
II. International Furniture Cogress, Muğla, Türkiye, 13 - 15 Ekim 2016, ss.350-354, (Tam Metin Bildiri)

26. Elastic constants of oriental beech (Fagus orientalis) and sessile oak (Quercus petraea)

GÜNTEKİN E., YILMAZ AYDIN T., AYDIN M.
II. International Furniture Congress, Muğla, Türkiye, 13 - 15 Ekim 2016, ss.290-292, (Tam Metin Bildiri)

27. A Case Study of University Industry Cooperation

CİRİTCİOĞLU H. H., AYDIN M., ŞENOL S.
II. International Furniture Congress, Muğla, Türkiye, 13 - 15 Ekim 2016, ss.62-68, (Tam Metin Bildiri)

28. Effects of heat treatment on some orthotropic mechanic properties of oak wood

YILMAZ AYDIN T., GÜNTEKİN E., AYDIN M.
1st international mediterranean science and engineering congress (IMSEC 2016), Adana, Türkiye, 26 - 28 Eylül 2016, ss.2717-2723, (Tam Metin Bildiri)

29. A Study on Compliance with Occupational Health and Safety Rules in Yacht Interior Production in Turkey

AYDIN M., KOÇ K. H.
The XXVIIth International Conference Research for Furniture Industry, Ankara, Türkiye, 17 - 18 Eylül 2015, ss.369-376, (Tam Metin Bildiri)

30. Use of 3D printing in Furniture Production

AYDIN M.
3rd International Symposium on Innovative Technologies in Engineering and Science, İspanya, 3 - 05 Mayıs 2015, ss.590-599, (Tam Metin Bildiri)

31. Türkiye de Yat İç Mekan Tasarımının Malzeme Seçimine Etkileri

AYDIN M.
3. Ulusal Mobilya Kongresi, Konya, Türkiye, 10 - 12 Nisan 2015, ss.347-357, (Tam Metin Bildiri)

32. Yat Mobilyası İmalatı ve İşletmelerin Karşılaştıkları Sorunlar Üzerine Alan Araştırması

AYDIN M., KOÇ K. H.
3. Ulusal Mobilya Kongresi, Konya, Türkiye, 10 - 12 Nisan 2015, ss.358-367, (Tam Metin Bildiri)

33. FEM: An approximate numerical method to analyze wood structural systems

YILMAZ AYDIN T., GÜNTEKİN E., AYDIN M.
International Caucasia Forestry Symposium, Artvin, Türkiye, 24 Ekim 2013, ss.1033, (Özet Bildiri)
Metrikler

Yayın

73

Yayın (WoS)

18

Yayın (Scopus)

18

Atıf (Scopus)

50

H-İndeks (Scopus)

4

Atıf (TrDizin)

7

H-İndeks (TrDizin)

2

Atıf (Diğer Toplam)

34

Proje

1

Açık Erişim

7